← Machine library

Haas VF-5/50XT representative exterior

Representative imagery · Source-listed configuration

Haas · VF

VF-5/50XT

Haas makes the best-value, high-performance, vertical machining centres available today. VF-5/50XT is a 50-taper vertical machining centre.

Type: Machining center
Generation: Source-listed configuration
Availability: Not verified
Source checked: 2026-11-04

Compare another machine

Source-listed specifications are not verification of your installed equipment. Standard equipment, options and model years can differ.

Manufacturer / dealer source

Machine parts

Spindle

Max Rating: 22.4 kW
Max Speed: 7500 rpm
Max Torque: 460 Nm @ 700 rpm
Drive System: 2-Speed Geared Head
Taper: BT or CT 50

Tool changer

Type: SMTC
Capacity: 30+1
Max Tool Diameter (adjacent empty): 178 mm
Max Tool Diameter (full): 102 mm
Max Tool Length (from gage line): 406 mm
Max Tool Weight: 13.6 kg
Tool-to-Tool (avg): 4.2 sec
Chip-to-Chip (avg): 6.3 sec

Table

Length: 1575 mm
Width: 584 mm
T-Slot Width: 16 mm
T-Slot Center Distance: 80.0 mm
Number of Std T-Slots: 7
Max Weight on Table (evenly distributed): 1814 kg

Travels

X Axis: 1524 mm
Y Axis: 660 mm
Z Axis: 635 mm
Spindle Nose to Table (~ max): 836 mm
Spindle Nose to Table (~ min): 201 mm

Axis motors

Max Thrust X: 15124 N
Max Thrust Y: 18238 N
Max Thrust Z: 24910 N

Feedrates

Rapids on X: 18.0 m/min
Rapids on Y: 18.0 m/min
Rapids on Z: 18.0 m/min
Max Cutting: 12.7 m/min

Coolant & air

Air Required: 113 L/min, 6.9 bar
Coolant Capacity: 360 L