← Machine library

Haas VF-6/40 representative exterior

Representative imagery · Source-listed configuration

Haas · VF

VF-6/40

Haas VFs are the best-value, high-performance, vertical machining centres available today. The VF-6 is a 1626 mm X-axis VMC.

Type: Machining center
Generation: Source-listed configuration
Availability: Not verified
Source checked: 2026-11-04

Compare another machine

Source-listed specifications are not verification of your installed equipment. Standard equipment, options and model years can differ.

Manufacturer / dealer source

Machine parts

Spindle

Max Rating: 22.4 kW
Max Speed: 8100 rpm
Max Torque: 122 Nm @ 2000 rpm
Drive System: Inline Direct-Drive
Max Torque w/opt Gearbox: 339 Nm @ 450 rpm
Taper: BT or CT 40
Bearing Lubrication: Air/Oil Injection
Cooling: Liquid Coole

Tool changer

Type: SMTC
Capacity: 30+1
Max Tool Diameter (adjacent empty): 152 mm
Max Tool Diameter (full): 76 mm
Max Tool Length (from gage line): 406 mm
Max Tool Weight: 5.4 kg
Tool-to-Tool (avg): 2.8 sec
Chip-to-Chip (avg): 3.6 sec

Table

Length: 1626 mm
Width: 711 mm
T-Slot Width: 16 mm
T-Slot Center Distance: 125.0 mm
Number of Std T-Slots: 5
Max Weight on Table (evenly distributed): 1814 kg

Travels

X Axis: 1626 mm
Y Axis: 813 mm
Z Axis: 762 mm
Spindle Nose to Table (~ max): 864 mm
Spindle Nose to Table (~ min): 102 mm

Axis motors

Max Thrust X: 15124 N
Max Thrust Y: 15124 N
Max Thrust Z: 24910 N

Feedrates

Rapids on X: 15.2 m/min
Rapids on Y: 15.2 m/min
Rapids on Z: 15.2 m/min
Max Cutting: 12.7 m/min

Coolant & air

Air Required: 113 L/min, 6.9 bar
Coolant Capacity: 360 L