← Machine library

Haas VF-6/50TR representative exterior

Representative imagery · Source-listed configuration

Haas · VF

VF-6/50TR

The VF-6/50TR is a versatile 5-axis 50-taper VMC based on the popular VF-6 VMC platform. It provides full simultaneous 5-axis motion.

Type: Machining center
Generation: Source-listed configuration
Availability: Not verified
Source checked: 2026-11-04

Compare another machine

Source-listed specifications are not verification of your installed equipment. Standard equipment, options and model years can differ.

Manufacturer / dealer source

Machine parts

Spindle

Max Rating: 22.4 kW
Max Speed: 7500 rpm
Max Torque: 460 @ 700 rpm
Drive System: 2-Speed Geared Head
Taper: BT or CT 50

Tool changer

Type: SMTC
Capacity: 30+1
Max Tool Diameter (adjacent empty): 254 mm
Max Tool Diameter (full): 102 mm
Max Tool Length (from gage line): 406 mm
Max Tool Weight: 13.6 kg
Tool-to-Tool (avg): 4.2 sec
Chip-to-Chip (avg): 6.3 sec

Travels

X Axis: 1626 mm
Y Axis: 813 mm
Z Axis: 762 mm
A Axis (tilt): ±120 °
B Axis (rot): 360 °
Spindle Nose to Platter (~ max): 508 mm
Spindle Nose to Platter (~ min): -254 mm
Spindle Nose to Table (~ max): 889 mm
Spindle Nose to Table (~ min): 127 mm

Axis motors

Max Thrust X: 15124 N
Max Thrust Y: 18238 N
Max Thrust Z: 24910 N

Feedrates

Rapids on X: 15.2 m/min
Rapids on Y: 15.2 m/min
Rapids on Z: 15.2 m/min
Max Cutting: 12.7 m/min

Trunnion

Platter Diameter: 310 mm
Max Weight on Platter: 226.8 kg
Max Part Swing (reduced at tilt angles > ± 90°): 787.4 mm
T-Slot Width: 15.88 mm
Number of Std T-Slots: 6
Pilot Bore Dia: 82.55 (+ 0.013, –0.0) mm
Pilot Bore Depth Through Through Rapids on A: 3000 °/min
Rapids on B: 3000 °/min
Max Cutting A: 2000 °/min
Max Cutting B: 2000 °/min

Coolant & air

Air Required: 113 L/min, 6.9 bar
Coolant Capacity: 360 L